BDL Logo
 
Tags | Thermal Transfer | Direct Thermal | Rolls | Fanfold



Tag Stock for a Barcode Label Printer

Barcode Datalink can manufacture for you tag stock cut to a size you require to fit into your barcode label printer such as a Zebra, Datamax or Sato mid-range or industrial printer.

Tag stock we provide comes in various thickness (GSM = grams per square metre) and the most popular is the 'Snowcard' material. It provides a smooth surface and very good print when used with the right ribbon. You barcode label printer should have a 'black mark' sensor to register tags that are supplied with a black line on the back.

Tag stock in roll form on 76mm cores to suit large label printers - black mark sensing with perforation between each tag

If you prefer we can supply the tag stock in fanfold. This is suitable for mobile printers or the desktop printers that can't fit a roll and is available is direct thermal (heat sensitive).

Fanfold direct thermal tag stock 90mm x 55mm - black mark sensing, perforation between each tag. This fanfold stock will work in mobile, desktop and large barcode label printers Direct thermal tag stock 100mm x 110mm fanfold can work in mobile Zebra QL series barcode printers 

 

For applications where a paper tag stock will not last, such as labelling products that are stored outdoors in the sun and rain, we produce a tag stock on 'Cyclone' material. This is a synthetic stock that can be tied to the product or stapled down. Using a resin ribbon it is possible to produce a crisp clear image that is scratch resistant. (Use B110-C ribbon)

Tag stock for large Zebra printers that require a ribbon for printing 

 

Related Information:

 Blank labels - paper, synthetic in rolls or fanfold

 Pre-printed labels - supplied ready to stick on yourself

 Full colour labels - ideal of product packaging

 Want to print your own labels - check out some low cost printing solutions