Zebra Printers High Resolution Printhead 300 & 600 dpi

Zebra Printers designed to print high density barcodes with 300 & 600 dpi print heads

When you have a requirement to print high resolution text, graphics and 1D or 2D barcodes you will need a label printer that can produce clear, crisp images constantly and on a wide variety of label sizes and materials. The Zebra 110Xi III Plus is the best choice for a number of reasons.

Firstly, it offers not only the usual 203 and 300 dpi (dots per inch) print heads, a 600 dpi option for very fine printing and supurb quality logos and graphics with no jagged edges.

Secondly, the most important point that is often over looked, it can handle narrow labels and keep them aligned. In an ordinary label printer if you try and print a 50mm x 5mm label (and the gap between labels is 2mm to 3mm) most printers will have trouble calibrating and remaining calibrated. This is because ordinary printers prefer the label to be at least 8mm deep (ie, 50mm x 8mm).

The most common application for the Zebra 110 Xi III Plus printer is in electronics manufacturing environments where circuit board labels need to be constantly printed on demand. Other applications which suit the Zebra 110 Xi III Plus printer is food labelling where you can print very clear and crisp ingredients panels and consumer information.

Designed to work 24/7 this industrial printer won’t let you down. For any special label requirements please give Barcode Datalink a call.

Related Information:

Need a barcode scanner to read your high density 1D or 2D barcodes?

Try the Motorola DS-6707-HD (High Density) Digital Imager hand held barcode scanner